Whether you bought our classic MOLLE rear‑door table or the new Jimny AIR — the install process is exactly the same. This guide walks you through mounting the table on your Suzuki Jimny JB74 (3‑door or 5‑door) rear door safely, cleanly, and in under 30 minutes.
🔧 What You’ll Need
-
Basic socket / wrench set (as specified in the product manual)
-
Screwdriver or driver‑bit (if required by your hardware)
-
Protective gloves (optional, for sharper edges)
-
Clean, flat working surface or mat
🧩 Installation — Step by Step
-
Open the rear door fully: Make sure you have full clearance and the door stays securely open during install.
-
Align the AIR table’s brackets to the mounting points on your JB74’s rear door — double check the fit for either 3‑door or 5‑door configuration.
-
Hand-thread the bolts first, ensuring alignment, then tighten progressively with your wrench (don’t overtighten on first pass).
-
Check for flush‑mount alignment — the AIR table should sit flush against the door when stowed (no protrusions or uneven gaps).
-
Test the fold-down mechanism: Swing the table down, lock it in place with the hardware, then fold up and stow again — there should be no rattles, and the movement should feel smooth.
-
Final torque‑check: Once aligned and tested, give each bolt a final snug (not over‑tight) to ensure stability under load.
✅ Pro tip: Double‑check everything after your first use — vibrations from road travel can sometimes loosen bolts.
https://youtube.com/shorts/oJ1PTrIvSN8
✅ Why the AIR Table Is a Smart JB74 Upgrade
-
It installs as easily as the classic model — no extra tools or modifications required.
-
At ~4.5 kg, the CNC‑cut aluminium build is light but strong — perfect for camping, tools, or gear hauling without adding unnecessary weight.
-
The black textured powdercoat finish is rugged, scratch‑resistant, and blends cleanly with Jimny interiors — good looks and durability in one.
-
With flush‑mount, zero‑rattle hardware, the table is stable whether you’re parked or on the move.
📌 Quick FAQ – Install & Use
| Question | Answer |
|---|---|
| Does the install differ from the MOLLE version? | No — the install process is identical for both MOLLE and AIR tables. |
| Will it fit both 3‑door and 5‑door JB74 models? | Yes — the brackets are designed to match mounting points on both versions. |
| Do I need special tools? | Just basic hand tools (wrench/socket set and screwdriver) — nothing specialized. |
| Is it setup once only, or repeated every use? | It’s a one-time install — after that it’s a folding table, no assembly required each time. |
